Solutions: DIY Crankshaft Tool

Aug. 1, 2017

One shop’s specialty tool created in-house secured a complicated job.

SHOP: Chuck's Auto Repair   LOCATION: 2 (Seattle and Shoreline, Wash.)   OWNER/S: Chris Galbraith  SIZE: 5,000 square feet; AVERAGE MONTHLY CAR COUNT: 400 (combined) ANNUAL REVENUE: $2 million (combined)

The Inspiration

In February, a customer came into the shop with a European vehicle. The vehicle’s crankshaft pulley needed to be replaced and Chuck’s Auto Repair—which has two locations in the Seattle metro area—did not have the necessary tool to remove and replace this part.  

“When you need a specialty tool for a car, you can’t buy it from a shop,” owner Chris Galbraith says. “The dealership, their mechanic may have it, but independent shops don’t have these tools. Trying to get a tool like that, you’ll usually have to turn away customers because you can’t find these tools.”

The shop did not want to lose this job to a dealer service center, so Nick Snowdon, the lead technician at this location, took on the task and created the tool in-house.

What It Is

A modified wheel bearing case with six fingers ground in to grip the crankshaft.

What It Does

Snowdon’s specialty tool helps him remove or loosen the bolt in the crankshaft pulley. The specialty tool holds the crankshaft in place, while the technician tries to remove the bolt holding on the pulley.

How It’s Made

According to Galbraith, Snowdon took a spare wheel bearing case from a front-wheel drive car that the shop had in a parts bin and used the bench grinder to grind into the casing to make fingers that would fit and hold the pulley. Once he made those fingers, he used a ratchet to hold it. He then took one of his sockets and welded it onto the wheel bearing case.

The Cost

Since the parts and equipment used to make this tool were already in the shop, Galbraith says that there was no monetary cost that went into the making of this makeshift crankshaft.

“The only cost I see is that it took about half an hour of Nick’s work time to make the tool,” Galbraith says. “The customer was billed for two hours of labor, including the time Nick took to put the tool together and the cost of the pulley.”

The ROI

Creating this specialty tool helped Chuck’s Auto Repair take on a $500 job, something that would not have been possible without Snowdon’s ingenuity.

“None of the parts shops had the tool and probably won’t ever. Only European dealer shops may have it,” Galbraith says. “And, even then, the specialty tool would have cost at least half the price of the total job.”

Although the tool has only been used for the one job thus far, the shop saved a job and gained a return customer in the process. And they now have a tool that helps set them apart from other shops in the area.

Sponsored Recommendations

How one auto shop was able to order 20% more parts

Learn how one auto shop talks about the benefit of using PartsTech in their shop.

Vehicle Inspection Checklist For Auto Shops

Vehicle inspections, whether digital or on paper, are crucial for auto shops, ensuring thorough assessments and fostering trust by transparently revealing a vehicle's condition...

6 Reasons Why A Digital Vehicle Inspection Is A Must-Have

In an era of growing technology and innovation, auto repair shops must keep pace with the latest advancements to meet customers preferences and remain competitive.

How Your Auto Shop Can Now Connect To 30 Tire Suppliers For Free

Yep! We have over 50 tire suppliers in our network. And PartsTech is the only platform where you can access more than 30 of those suppliers FREE OF CHARGE.